DIGITAL TIMER

Product Details:

Over the years, we have been able to establish ourselves as a prominent figure in this industry by offering the wide gamut of UTR 9611 Universal Timer Range. The offered timer is manufactured under the visionary guidance of skilled professionals using optimum grade components and ultra-modern machines in compliance with set industry norms. Our offered timer is made available in number of specifications as per the information laid down by our clients.

Features:

• Correct reading
• Lightweight

Product Details:

DUAL DISPLAY
supply voltage: 230v ac,+-10%, 50hz

relay rating: 10 co, 7 amp. 230 volt ac

Product Details:

Model: SQT 9611 (Sequential Timer)
Frame Size: 96 × 96 mm (panel mount, cutout 92 × 92 mm)

Display:

Dual 4-digit LED (0.56” RED + 0.39” GREEN)

Inputs:

Start/Stop via front keypad or external switch

Outputs:

Relay (1CO or 2CO, 5 Amp, 230V AC)
SSR (12V DC approx.)
Range: 0–9999 sec/min/hr (factory set)
Modes: Sequential ON/OFF timing for multiple loads
Reset Facility: Manual reset via keypad
Supply Voltage: 230V AC ±10%, 50Hz
Enclosure: Polycarbonate + ABS plastic
Operating Conditions: 0–55°C, up to 95% RH non-condensing

Product Details:

Model: TMR 9644 (Sequential Timer)
Frame Size: 96 × 96 mm (panel mount, cutout 92 × 92 mm)

Display:

Dual 4-digit LED (0.56” RED + 0.39” GREEN)
Set Points: Up to 4 programmable set points (hence the “9644” designation)

Range Settings: Configurable as:

99.99 sec / 999.9 sec
99.59 min / 999.9 min
99.59 hrs / 999.9 hrs

Outputs:

4 relays (1CO, 7 Amp @ 230V AC)
SSR output (12V DC, max 20mA)

Operating Modes:

Sequential ON/OFF
Delayed ON / Delayed OFF
Cycle Mode (configurable)
Count Direction: UP / DOWN selectable
Reset Options: Front keypad / external reset switch
Supply Voltage: 230V AC ±10%, 50Hz
Memory Retention: Saves preset values during power loss

Product Details:

Channels: 10, 12, 16, or 20 (depending on model)
Display: Dual LED (main count + preset value)
Range Settings: Seconds / Minutes / Hours (factory configurable)

Outputs:

10–20 relays (1CO, 7 Amp @ 230V AC)
SSR outputs (12V DC, optional)

Modes:

Sequential ON/OFF
Cascading (parallel sequences possible)
Reset Options: Front keypad / external reset switch
Supply Voltage: 230V AC ±10%, 50Hz
Enclosure: Polycarbonate + ABS, panel mount (usually 96 × 96 mm or larger)

Product Details:

Model: DT 9611
Display: 3-digit, 7-segment red LED (easy to read)
Frame Size: 96 × 96 mm (panel cutout 92 × 92 mm)
Mounting: Panel mount
Operating Modes: Semi-auto / Auto
Range: 0–99.9 sec/min or up to 999 sec/min (factory set)
Control Output: Relay (10A, 2CO)
Indication: Red display with clear timing status
Input Options: Trigger start or power-on start
Reset Options: Manual or auto reset
Memory Retention: Non-volatile memory (retains settings after power failure)
Power Supply: 230V AC ±10%, 50Hz
Timer Type: Digital presettable
Relay Mode: 2 changeover (2CO)
Current Rating: 10A
Shape: Square (96 × 96 mm)
Warranty: 1 year

Product Details:

Model: DT 9601 (VENEX make)
Display: 3-digit, 7-segment LED (clear visibility)
Frame Size: 96 × 96 mm (standard panel cutout)
Mounting: Panel mount type
Operating Modes: Semi-auto / Auto
Range: Configurable timing range (typically 0–99.9 sec/min or up to 999 sec/min depending on factory setting)
Control Output: Relay (usually 1CO or 2CO, 10A capacity)
Reset Options: Manual reset or auto reset
Input Options: Trigger start or power-on start
Memory: Non-volatile memory retains settings after power failure
Supply Voltage: 230V AC ±10%, 50Hz

Product Details:

FEATURES :
Control output RELAY / SSR as per requirement
» Industrial level of EMC test & higher reliability» 16 x 2 Blue / white LCD screen» Back side START / STOP terminal available» Easy operating» Cascading facility available

MODEL : SQT 9616
SETTING
Set Point
16 Set Point (8 to 16 Available)
Range Setting99.99 Sec. / 999.9 Sec. / 99.59 Min. / 999.9 Min. / 99.59 Hrs / 999.9 Hrs.(Configurable)
OUTPUT
Control Output
16 Relay/ 1CO 5 Amp. @ (resistive load) 230V AC or 12V max 20mA DC SSR Output(Any one Factory Set
INPUT:
Control Input:4 Pulse (Micro Switch / Proximity) Input Available (Back Start / Stop)
Cascading:1 + 3 parallal

SEQUENTIAL CARD:
SETTING:
Set Point:20 Set PointRange Setting
Range Setting:99.99 Sec. / 999.9 Sec. / 99.59 Min. / 999.9 Min. / 99.59 Hrs / 999.9 Hrs.(Configurable)

OUTPUT

Control Output:20 Relay/ 1CO 7 Amp. @ (resistive load) 230V AC or 12V max 20mA DC SSR Output(Any one Factory Set

INPUT:
Control Input:9 Pulse (Micro Switch / Proximity) Input Available


SPECIFICATIONS :

Supply Voltage:230v AC, ±10%, 50 Hz
Operating Mode:Delayed ON / Delayed OFF / Cycle Mode (Configurable)
Count Direction:UP / Down (Configurable)
Memory Retention:Yes / No (Configurable)
Reset:Front & Back Both Reset Available
Display:16 x 2 LCD Display (Blue)

Product Details:

Model: CT 9000H (Time Totalizer)
Frame Size: 96 × 96 mm (panel mount, cutout 92 × 92 mm)

Display:

6-digit RED LED (0.56”)
Shows total accumulated time clearly

Range:

0–999999 hours (depending on configuration)

Inputs:

Voltage pulse (factory set)
Can be triggered by relay contacts, proximity sensors, or micro switches

Outputs:

Relay (optional, 1CO, 5 Amp, 230V AC)

Reset Options:

Front keypad reset
External reset switch
Supply Voltage: 230V AC ±10%, 50Hz
Enclosure: Polycarbonate + ABS plastic
Operating Conditions: 0–55°C, up to 95% RH non-condensing

Product Details:

Model: CYC 9611
Brand: Venex
Display: Updated 4-digit LED display (clear visibility)
Control Outputs: Relay / SSR options
Relay Rating: 1CO (2 Relay), 7A at 230V AC

Cycle Settings:

ON time / OFF time / Total time configurable
Range: 99.99 sec / 999.9 sec / 9999 sec, minutes, or hours
Supply Voltage: 230V AC ±10%, 50Hz
Start Command: Front keypad or back terminal
Reset Facility: Auto reset or manual reset
Memory Retention: Configurable (YES/NO)
Enclosure Material: Polycarbonate + ABS plastic
Operating Temperature: 0°C – 55°C
Relative Humidity: Up to 95% RH, non-condensing

• Features:

• Easy operation with cycle selection

• Industrial EMC-tested for reliability

• Economic model for cost-effective usage

Product Details:

Model: RTC 9666 (VENEX)
Frame Size: 96 × 96 mm (panel cutout 92 × 92 mm)

Display:

Dual 6-digit LED (0.56” RED + 0.56” GREEN)

Inputs:

Set Point: 16 ON times + 16 OFF times per day
Weekly day skip/unskip option

Outputs:

Relay (1CO, 7 Amp, 230V AC)
Supply Voltage: 230V AC ±10%, 50Hz
Reset: By front key
Enclosure: Polycarbonate + ABS plastic
Operating Conditions: 0–55°C, up to 95% RH non-condensing

Product Details:

Model: UNI 9612 (Universal Input Temperature Controller)
Frame Size: 96 × 96 mm (panel mount, cutout 92 × 92 mm)

Display:

Dual 4-digit LED (RED + GREEN)
Shows process temperature and set value simultaneously

Universal Inputs:

Thermocouples: J, K, R, S, T, N
RTD: Pt100, Pt1000 (2W/3W configurable)
Analog signals: 4–20 mA, 0–10 V DC, 0–20 mA

Range Examples:

J: 0–400°C / 0–600°C
K: 0–1200°C
PT-100: -50.0°C to 200.0°C / 0–400°C

Outputs:

Relay (1CO or 2CO, 5–7 Amp, 230V AC)
SSR (12V DC approx.)
Control Modes: ON-OFF / PID (configurable)
Operating Modes: HEAT / COOL selectable
Accuracy: ±1% of FSD
Supply Voltage: 230V AC ±10%, 50Hz
Enclosure: Polycarbonate + ABS plastic
Operating Conditions: 0–55°C, up to 95% RH non-condensing

Product Details:

Supply Voltage: 230V AC ±10%, 50Hz
Switch Rating: 10A (relay output, 1 channel)
Programming Capacity:
16 ON times + 16 OFF times per day
Weekly day skip/unskip option
Display: Dual 6-digit LED (0.56" red + 0.56" green)
Frame Size: 96 × 96 mm (panel cutout 92 × 92 mm)
Enclosure: Polycarbonate + ABS plastic
Reset: By front key keypad
Backup Reserve: 1 year memory retention
Operating Temperature: 0°C – 55°C
Relative Humidity: Up to 95% RH, non-condensing

Product Details:

RSP 30 

REAL TIME CLOCK WITH STARTER
VOLTAGE/ AMPERE PROTECTION
16 ON - OFF TIME


RSPW 30

SINGAL PHASE STARTER WITH DUAL TANK WATER LAVEL CONTROLLER
WITH DRY RUN , OVER VOLT, UNDER VOL, OVER LOAD(OVER CURRENT) PROTECTION
16 ON-OFF TIMER