DIGITAL TEMPERATURE CONTROLLER

Product Details:

Features:

16 programmable Stage function

Control output RELAY / SSR

Rich Size display

Hold & Dump time selectable

Industrial level of EMC test & higher reliability

 

INPUT:

Sensor: J & K OR RTD & RTD.1 2W/3W (Configurable) also (R/S/T/N/PT-1000)

Range: J (00C to 4000C & 00C to (6000C), K (00C to 12000C), PT-100 2W/3W ((00C to 4000C, - 50.00C to 200.00C)

Stage: 0 to 16 Stages Selectable

 

OUTPUT:

Control Output: RELAY+SSR

Relay Rating: 1CO, 10 Amps. 230 Volt AC

SSR / Buzzer: 12 V DC Approximately

 

Specifications:
Supply Voltage: 230v AC, ±10%, 50Hz

Set Point: 16 Set Point

Control Mode: PID / Time Proportional / ON-OFF (Configurable)

Operating Mode: Heating mode

Accuracy: ±1% of FSD

Enclosure Material: Polycarbonate + ABS Plastic

Operating Temp.:0°C 55°C

Relative Humidity: Up to 95% RH Non Condensing

Additional Information:

• Item Code: PRF_9611_JK_RS_230VAC
• Production Capacity: 600 NOS.
• Delivery Time: 1 TO 7 DAYS.
• Packaging Details: 6 NOS. OR 50 NOS.

Product Details:

Features:

Easy Set-up Operation
Heat only or (heat & cool) strategy.

High visibility display

Industrial level of EMC test & higher reliability

 

INPUT:

Sensor: J & K OR RTD & RTD.1 2W/3W (Configurable) (Also available in R/S/T/N/PT 1000)

Range: J(0°C to 400°C & 0°C to (600°C, K(0°C to 1200°C), PT-100 2W/3W(0°C to 400°C, - 50.0°C to 200.0°C)

 

OUTPUT:

Control Output: RELAY + RELAY + SSR

Capacity: 1CO, 10 Amps, 230 Volt AC

SSR: 12 V DC Approximately

Specifications:
Supply Voltage: 230v AC, ±10%, 50Hz
Set Point: 2 Set Point
Control Mode: Time Proportional / ON-OFF /PID (Configurable)
Operating Mode: HEAT / COOL Mode (Configurable)
Accuracy: ±1% of FSD
Enclosure Material: Polycarbonate + ABS Plastic
Operating Temperature: 0 °C - 55 °C
Relative Humidity: Up to 95% RH Non Condensing

Additional Information:

• Item Code: PID_9611_JK_RRS_230VAC
• Production Capacity: 500 NOS.
• Delivery Time: 1 TO 7 DAYS.
• Packaging Details: 6 NOS. OR 50 NOS.

Product Details:

Features:

Easy Operation economic model
Control output RELAY / SSR
Use+and-key to set temperature
The new 3+3 digit display
Industrial level of EMC test & higher reliability

INPUT:

Sensor: J & K OR RTD & RTD.1 2W/3W (Configurable) (Also available in R/S/T/N/PT 1000)

Range: J(0°C to 400°C & 0°C to (600°C, K(0°C to 1200°C), PT-100 2W/3W(0°C to 400°C, - 50.0°C to 200.0°C)

OUTPUT:

Control Output: RELAY + SSR

Capacity: 1CO, 10 Amps, 230 Volt AC

SSR: 12 V DC Approximately

Specifications:
Supply Voltage: 230v AC, ±10%, 50Hz
Set Point: 1 Set Point
Control Mode: Time Proportional / ON-OFF (Configurable)
Operating Mode: HEAT / COOL Mode (Factory Set)
Accuracy: ±1% of FSD
Enclosure Material: Polycarbonate + ABS Plastic
Operating Temperature: 0 °C - 55 °C
Relative Humidity: Up to 95% RH Non Condensing

Product Details:

Model: DST 9611 (Sock Timer + Temperature Controller)
Frame Size: 96 × 96 mm (panel mount, cutout 92 × 92 mm)

Display:

Dual 4-digit LED (RED + GREEN)
Shows process temperature and timer simultaneously

Inputs:

Thermocouples: J, K, R, S, T, N
RTD: Pt100, Pt1000 (2W/3W configurable)
Timer input: programmable range (seconds/minutes/hours)

Outputs:

Relay (1CO or 2CO, 5–7 Amp, 230V AC)
SSR (12V DC approx.)
Control Modes: ON-OFF / PID (configurable)
Operating Modes: HEAT / COOL selectable
Accuracy: ±1% of FSD
Supply Voltage: 230V AC ±10%, 50Hz
Enclosure: Polycarbonate + ABS plastic
Operating Conditions: 0–55°C, up to 95% RH non-condensing

Product Details:

Model: DTK 9611
Brand: Venex
Size: 96 × 96 mm (panel cutout 92 × 92 mm)
Input Type: J-type Thermocouple (factory set, other options available)
Control Action: ON/OFF
Output Type: Relay (1CO, 7A at 230V AC)
Temperature Range: 0–400°C
Power Supply: 90–270V AC/DC
Display: Single LED display (blind type – shows process value only, not setpoint)
Communication: None (basic model)
Applications: Food machinery, bakery ovens, industrial furnaces, sealing machines

Product Details:

Physical & Display
Frame size: 96 × 96 mm
Panel cutout: 92 × 92 mm
Display: 3-digit, 0.56” red LED (clear visibility)
 Input Options

Sensor types:

Thermocouple J: 0°C to 400°C / 600°C
Thermocouple K: 0°C to 1200°C
RTD PT-100 (2W/3W): 0°C to 400°C or -50.0°C to 200.0°C
Configurable inputs: J, K, RTD (also available in R/S/T/N/PT1000)
Output & Control
Control output: Relay + SSR
Relay capacity: 1CO, 7 Amp, 230V AC
SSR drive: 12V DC approx.
Control mode: Time Proportional / ON-OFF (configurable)
 Electrical
Supply voltage: 230V AC ±10%, 50Hz
Set point: Single set point
Operating modes: Heat or Cool (factory set)
 Performance
Accuracy: ±1%
Reliability: Industrial-level EMC test compliance for higher reliability
Features
Easy feather-touch operation with + and – keys
Economic model with simple setup
New 3+3 digit display for better readability
Suitable for industrial applications requiring precise temperature control

Product Details:

Model: DTC 9611 (Single Display Temperature Controller)
Frame Size: 96 × 96 mm (panel mount, cutout 92 × 92 mm)

Display:

Single 4-digit RED LED (0.56”)
Shows measured temperature directly

Input Types:

Thermocouples: J, K, R, S, T, N
RTD: Pt100, Pt1000 (2W/3W configurable)

Range:

J: 0–400°C / 0–600°C
K: 0–1200°C
PT-100: -50.0°C to 200.0°C / 0–400°C

Outputs:

Relay (1CO, 7 Amp, 230V AC)
SSR (12V DC approx.)
Control Modes: ON-OFF / PID (configurable)
Operating Modes: HEAT / COOL selectable
Accuracy: ±1% of FSD
Supply Voltage: 230V AC ±10%, 50Hz
Enclosure: Polycarbonate + ABS plastic
Operating Conditions: 0–55°C, up to 95% RH non-condensing

Product Details:

Model: DTC 9628 Jumbo Double Display Temperature Controller
Frame Size: 96 × 86 mm, Panel Cutout 92 × 92 mm

Display:

4-digit 0.80” RED LED (primary)
4-digit 0.56” GREEN LED (secondary)

Inputs:

Thermocouples: J, K, R, S, T, N
RTD (Pt100, Pt1000) – 2W/3W configurable

Range:

J: 0–400°C / 0–600°C
K: 0–1200°C
PT-100: -50.0°C to 200.0°C / 0–400°C

Outputs:

Relay + Relay + SSR (Heat/Cool selectable)
Relay capacity: 1CO, 7 Amp, 230V AC
SSR: 12 V DC approx.
Control Modes: Time Proportional / ON-OFF / PID (configurable)
Operating Modes: HEAT / COOL selectable
Accuracy: ±1% of FSD
Supply Voltage: 230V AC ±10%, 50Hz
Enclosure: Polycarbonate + ABS plastic
Operating Conditions: 0–55°C, up to 95% RH non-condensing

Product Details:

FEATURES :» Operating, economic model» The new version updated 4 digits display» Industrial level of EMC test & higher reliability

SPECIFICATIONS :
INPUT
Input (AC):0 - 5 AMP AC Direct OR UP TO 2000/5 CT Selection (Factory Set)

SPECIFICATIONS:
Supply Voltage:230V AC, ±10%, 50Hz
Range:0 - 2000 AMP AC OR 0-2500 AMP DC (Factory Set)
Accuracy:±1% of FSD
Enclosure Material:Polycarbonate + ABS Plastic
Operating Temp.:00C 550C
Relative Humidity:Upto 95% RH Non Condensing
Note:30 A AC / 50 A AC / 100 A AC / 200 A AC Direct Available

Product Details:

INPUT : Sensor Range J & K OR RTD & RTD.1 2W/3W (Configurable) 0 0 0 0 0 0 0 0 0 0 J(0C to 400C & 0C to (600C), K(0C to 1200C), PT-100 2W/3W((0C to 400C, - 50.0C to 200.0C)

OUTPUT :Control Output Capacity SSR RELAY + RELAY + SSR 1CO + 1CO, 7 Amp, 230 Volt AC 12 V DC Approximately

SPECIFICATIONS:Supply Voltage Set Point Control Mode Operating Mode Accuracy Enclosure Material Operating Temperature Relative Humidity 230v AC, ±10%, 50Hz 2 Set Point (Heat or Cool) Time Proportional / ON-OFF / PID (Configurable) HEAT / COOL Mode Selectable ±1% of FSD Polycarbonate + ABS Plastic 0 0 0C - 55C Upto 95% RH Non Condensing

Product Details:

Model: UNI 9611 (Universal Input Temperature Controller)
Frame Size: 96 × 96 mm (panel mount, cutout 92 × 92 mm)

Display:

Single 4-digit RED LED (0.56”)
Shows measured temperature directly

Universal Inputs:

Thermocouples: J, K, R, S, T, N
RTD: Pt100, Pt1000 (2W/3W configurable)
Analog signals: 4–20 mA, 0–10 V DC, 0–20 mA

Range:

J: 0–400°C / 0–600°C
K: 0–1200°C
PT-100: -50.0°C to 200.0°C / 0–400°C

Outputs:

Relay (1CO, 7 Amp, 230V AC)
SSR (12V DC approx.)
Control Modes: ON-OFF / PID (configurable)
Operating Modes: HEAT / COOL selectable
Accuracy: ±1% of FSD
Supply Voltage: 230V AC ±10%, 50Hz
Enclosure: Polycarbonate + ABS plastic
Operating Conditions: 0–55°C, up to 95% RH non-condensing